Характеристики и описание

Описание оборудования
Single head system
General specifications
Sensing range	80 ... 1000 mm
Dead band	0 ... 80 mm
Standard target plate	100 mm x 100 mm
Transducer frequency	approx. 255 kHz
Response delay	approx. 150 ms
Indicators/operating means
LED green	Power on
LED red	flashing: error(br>permanent: no object detected
Electrical specifications
Operating voltage	10 ... 30 V DC , ripple10%_SS
No-load supply current	? 50 mA
Input/Output
Synchronization	1 synchronous connection, bi-directional 0-level: -U_B...+1 V 1-level: +4 V...+U_B input impedance: > 12 k? synchronization pulse: ? 100 µs, synchronization interpulse period: ? 2 ms
Synchronization frequency
Input
Input type	1 Parameterization input Input impedance: > 4.7 k?
Output
Output type	1 frequency output, push/pull, programmable
Resolution	1 mm
Deviation of the characteristic curve	± 1 % of full-scale value
Repeat accuracy	± 0.5 % of full-scale value
Load impedance	> 1000 Ohm < 100 nF
Temperature influence	± 1.5 % of full-scale value
Approvals and certificates
UL approval	cULus Listed, General Purpose
CSA approval	cCSAus Listed, General Purpose
CCC approval	CCC approval / marking not required for products rated ?36 V
Ambient conditions
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type	Connector M12 x 1 , 5-pin
Degree of protection	IP67
Material
Mass	60 g